Brushless Random, Palm and Delta Orbital Sanders with Dust Extractor - 10 Litre
The Rutlands® brushless random, palm and delta orbital sanders with 10L dust extractor deliver dust-free sanding, capturing the finest, most harmful dust particles down to 0.3 micron. The quiet, efficient dust extractor synchronises with the sanders, automatically activating as you work. The dust extractor will run for a further 5 seconds after sanding, clearing any dust left in the hose. The sander's centralised extraction systems, when used with net abrasive discs, allows dust-free sanding, further reducing sanding time whilst ensuring the highest quality of finish.
Brushless Random, Palm & Delta Orbital Sanders
The sanders deliver maximum operator comfort, low vibration values (3.07 m/s²) and low noise (80 dB LpA). Ergonomically designed, the lightweight, low profile bodies allow the sanders to be used for long periods without fatigue, whether operated flat, vertically or overhead. Supplied with both 150mm and 125mm backing pads, the random orbital sander runs in a 5.0mm orbit, providing a high material removal rate whilst yielding consistent surface finishes in a range of applications. The palm orbital sander is supplied with an 81mm x 133mm backing pad and the delta orbital sander is supplied with a 100mm x 152mm backing pad, both running in a 3.0mm orbit. Both palm and delta sanders are designed for fine sanding and finishing applications, reaching into tight corners and hard-to-reach areas such as windows, doors and frames.
The 350W high performance brushless motors maintain constant speed, even under heavy load, ensuring a consistent material removal rate and finish quality throughout. The soft start motors with electronic brake gradually and safely build up speed and stop instantly. The motors operate between a 4,000 to 10,000rpm range, with the paddle levers allowing careful control of the speed between 4,000rpm and the current max rpm, set using the + and - buttons and LED indicators.
Dust Extractor with Auto Start
Extremely quiet in use at just 65dB, this dust extractor has four-fold dust filtration, comprising of a HEPA fleece filter bag, HEPA filter cartridge, HEPA filter basket and HEPA filter sponge, capturing dust particles down to 0.3 micron and ensuring that the air re-entering the atmosphere is clean. The 1200W motor delivers an enormous suction power of 260 mbar and features variable air-flow control, to adjust the suction to suit all floor surfaces. Supplied with a 2m highly flexible kink-proof hose, 2 x 500mm aluminium straight tubes, 300mm floor head, 100mm floor head, crevice tool, fleece filter bag and a stepped rubber adaptor to connect to the ports of power tools.
The extractor should not be operated for more than 20 minutes continuously. After 20 minutes of continuous operation, turn off the unit and allow a 15 minute resting period before next use. Clean the body, filter and dust bag after use. ©
Original: $935.48
-65%$935.48
$327.42More Images
Brushless Random, Palm and Delta Orbital Sanders with Dust Extractor - 10 Litre
The Rutlands® brushless random, palm and delta orbital sanders with 10L dust extractor deliver dust-free sanding, capturing the finest, most harmful dust particles down to 0.3 micron. The quiet, efficient dust extractor synchronises with the sanders, automatically activating as you work. The dust extractor will run for a further 5 seconds after sanding, clearing any dust left in the hose. The sander's centralised extraction systems, when used with net abrasive discs, allows dust-free sanding, further reducing sanding time whilst ensuring the highest quality of finish.
Brushless Random, Palm & Delta Orbital Sanders
The sanders deliver maximum operator comfort, low vibration values (3.07 m/s²) and low noise (80 dB LpA). Ergonomically designed, the lightweight, low profile bodies allow the sanders to be used for long periods without fatigue, whether operated flat, vertically or overhead. Supplied with both 150mm and 125mm backing pads, the random orbital sander runs in a 5.0mm orbit, providing a high material removal rate whilst yielding consistent surface finishes in a range of applications. The palm orbital sander is supplied with an 81mm x 133mm backing pad and the delta orbital sander is supplied with a 100mm x 152mm backing pad, both running in a 3.0mm orbit. Both palm and delta sanders are designed for fine sanding and finishing applications, reaching into tight corners and hard-to-reach areas such as windows, doors and frames.
The 350W high performance brushless motors maintain constant speed, even under heavy load, ensuring a consistent material removal rate and finish quality throughout. The soft start motors with electronic brake gradually and safely build up speed and stop instantly. The motors operate between a 4,000 to 10,000rpm range, with the paddle levers allowing careful control of the speed between 4,000rpm and the current max rpm, set using the + and - buttons and LED indicators.
Dust Extractor with Auto Start
Extremely quiet in use at just 65dB, this dust extractor has four-fold dust filtration, comprising of a HEPA fleece filter bag, HEPA filter cartridge, HEPA filter basket and HEPA filter sponge, capturing dust particles down to 0.3 micron and ensuring that the air re-entering the atmosphere is clean. The 1200W motor delivers an enormous suction power of 260 mbar and features variable air-flow control, to adjust the suction to suit all floor surfaces. Supplied with a 2m highly flexible kink-proof hose, 2 x 500mm aluminium straight tubes, 300mm floor head, 100mm floor head, crevice tool, fleece filter bag and a stepped rubber adaptor to connect to the ports of power tools.
The extractor should not be operated for more than 20 minutes continuously. After 20 minutes of continuous operation, turn off the unit and allow a 15 minute resting period before next use. Clean the body, filter and dust bag after use. ©
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Rutlands® brushless random, palm and delta orbital sanders with 10L dust extractor deliver dust-free sanding, capturing the finest, most harmful dust particles down to 0.3 micron. The quiet, efficient dust extractor synchronises with the sanders, automatically activating as you work. The dust extractor will run for a further 5 seconds after sanding, clearing any dust left in the hose. The sander's centralised extraction systems, when used with net abrasive discs, allows dust-free sanding, further reducing sanding time whilst ensuring the highest quality of finish.
Brushless Random, Palm & Delta Orbital Sanders
The sanders deliver maximum operator comfort, low vibration values (3.07 m/s²) and low noise (80 dB LpA). Ergonomically designed, the lightweight, low profile bodies allow the sanders to be used for long periods without fatigue, whether operated flat, vertically or overhead. Supplied with both 150mm and 125mm backing pads, the random orbital sander runs in a 5.0mm orbit, providing a high material removal rate whilst yielding consistent surface finishes in a range of applications. The palm orbital sander is supplied with an 81mm x 133mm backing pad and the delta orbital sander is supplied with a 100mm x 152mm backing pad, both running in a 3.0mm orbit. Both palm and delta sanders are designed for fine sanding and finishing applications, reaching into tight corners and hard-to-reach areas such as windows, doors and frames.
The 350W high performance brushless motors maintain constant speed, even under heavy load, ensuring a consistent material removal rate and finish quality throughout. The soft start motors with electronic brake gradually and safely build up speed and stop instantly. The motors operate between a 4,000 to 10,000rpm range, with the paddle levers allowing careful control of the speed between 4,000rpm and the current max rpm, set using the + and - buttons and LED indicators.
Dust Extractor with Auto Start
Extremely quiet in use at just 65dB, this dust extractor has four-fold dust filtration, comprising of a HEPA fleece filter bag, HEPA filter cartridge, HEPA filter basket and HEPA filter sponge, capturing dust particles down to 0.3 micron and ensuring that the air re-entering the atmosphere is clean. The 1200W motor delivers an enormous suction power of 260 mbar and features variable air-flow control, to adjust the suction to suit all floor surfaces. Supplied with a 2m highly flexible kink-proof hose, 2 x 500mm aluminium straight tubes, 300mm floor head, 100mm floor head, crevice tool, fleece filter bag and a stepped rubber adaptor to connect to the ports of power tools.
The extractor should not be operated for more than 20 minutes continuously. After 20 minutes of continuous operation, turn off the unit and allow a 15 minute resting period before next use. Clean the body, filter and dust bag after use. ©
